Item Check/My Items

Item Check/My Items

Overview

Item checks verify equipment status and document condition for both department and personal gear. The same workflow applies to Item Check (department equipment) and My Items (personal gear).

Use item checks for daily equipment inspections, NFPA compliance testing, and personal protective equipment verification.

Before You Start

Prequisites

Before completing item checks, ensure:

    • You have item check permissions for your assigned equipment
    • Equipment locations and designations are current in the system
    • Required testing equipment is available for NFPA items
    • Mobile device has stable internet connectivity

Accessing Check Items

  1. Navigate to the Item Check list and locate your assigned equipment.
Notes

Apply filters to narrow results by location, type, or status.

  1. Expand the equipment row and select the required check type.
    image-20250615-201857.png
  1. Verify item details, including unit designation, station assignment, and current location.
    image-20250615-202006.png


Checking Item Status 

  1. Complete required NFPA testing for specialized items(ladders, PPE, SCBA, hose, pumps).
    image-20250615-191651.png
  1. Inspect each item and mark the appropriate condition:
      • OK: Item meets operational standards.
      • Not OK: Item requires attention or repair.
      • Not Checked: Mark checkbox if you did not check the issue.
        image-20250615-202528.png


  1. Add detailed remarks for any issues or observations. Use the Pencil icon to add preset remarks.
    image-20250615-202612.png
  1. Add attachments (where applicable).

Submitting Check Results

  1. Scroll down to the Email section.
  2. Configure email notifications by enabling Send Item Check Toand adding recipient addresses.
    image-20250615-202725.png
  1. Submit the check using Submit [Check Type] Item Check.
Info

Note: To email the report without submitting it, click Email.

1

    • Related Articles

    • Inventory, Maintenance, and Item Checks Overview

      Inventory, Maintenance, and Item Checks Item and apparatus checks ensure your department maintains compliance standards and operational readiness. The FireWorks system provides three types of checks to meet different requirements for items, ...

    • Inventory & Maintenance Module Overview

      Inventory & Maintenance Module Overview Transitioning to the New Interface We are rolling out the new Inventory & Maintenance interface to all users. You can toggle between the Standard (i.e., old) and Beta (i.e., new) designs using the toggle button ...

    • Batch Item Check guide

      There is a PDF copy if this article available if you wish to download and print. To access the document, click on the attachment link at the bottom of the page.

    • Inventory & Maintenance Interface Overview

      EPR FireWorks Documentation – Inventory & Maintenance Interface Overview Overview This guide explains the Inventory & Maintenance module's interface components and navigation tools. Understanding these elements helps you work efficiently across all ...

    • My Items Check in the web browser

      Attached is the PDF article of these instructions. To download the article click "Attachments".