Setting up Cardiac Monitors

Setting up Cardiac Monitors

Setting up Cardiac Monitors


Objectives:
1. To add a Cardiac Monitor into the Fireworks system.


This guide will be used to show the installation of Cardiac Monitors in the Fireworks System.

To setup the monitors, we will need some data off the device we want to enter into the system.
• Serial Number
• Name of the Device ID (this you will choose when you enter the monitor)
• Apparatus device is going on

Once we have the necessary data we will start by logging in the system and accessing the admin side of the system.
Once on the admin side of the system you will need to access the following:
  1. ePCR Module
  2. Settings
  3. Medical Devices Interface



Once you access the Medical Devices Interface page you will see columns to enter the data gathered for each cardiac monitor.
On this page you can enter the following information.
• Device Type- This will be the brand of device you are entering-
  1.        Stryker-Physio
  2.        Zoll
  3.        Phillips
  4.        Stryker New API
• Device Serial #- The serial number for the device
• Device ID- The Device ID (this is customizable for the department)
• Device Model- Model of the device
• App ID- Apparatus the device is on.



Once you have entered all the information on this page, click the exit button.

Lastly, we need to enter the information in the ePCR Agency Configuration section under the Device section.
Enter all the information again from the device page to the configuration page and click exit. Entering this information in the Agency Configuration allows the cardiac monitor data to report for NEMSIS reporting.




​


    • Related Articles

    • Pulling Vitals From Medical Devices

      A copy of this article is attached at the bottom of this article if you wish to download.

    • Importing Patient Vitals in the ePCR

      A copy of this article is available to download below.

    • NERIS Medical (Not ePCR)

      EPR FireWorks Documentation – Medical Overview Disclaimer: NERIS is currently under development by the Fire Safety Research Institute (FSRI). This guide reflects the system as implemented in EPR FireWorks. Functionality may evolve as NERIS continues ...

    • Cardiac Arrest Report

      Attached is the PDF article of these instructions. To download the article click "attachments". In the BI Module, select "Reports and Queries" Toggle the "Reports" to green "Queries" You can search for the report in the left pane, the drop-down, or ...

    • Adding Quick Procedures

      A copy is available for you to download below.